Industrial Mixer Impeller Options

Impeller Options for Industrial Mixing Applications

Impeller selection is the starting point of any mixer configuration. The right impeller means the rest of the mixer can work in balance and provide quality mixing. Issues such as uniformity, area of influence, shear, solid suspension, and many others, are addressed by correct impeller selection and positioning.

Quality Impeller Options

Every line of Dynamix mixers provides a variety of impeller options for optimized engineering and quality results. Our impellers are available in a wide selection of sizes to suit your application. Specialty and custom coatings are also available for added corrosion or abrasion resistance.


Fixed Blade Impellers

Industrial Mixing - Fixed Dynaflow™ Airfoil Impeller

Fixed Dynaflow™ Airfoil Impeller

The Dynaflow™ airfoil impeller is a high-efficiency, low shear, 4-bladed impeller. This impeller produces maximum fluid flow using minimum power input.

arrow DMX Series Portable Mixers
arrow GMX Series Industrial Agitators
arrow NMX Series Industrial Agitators
arrow SMX Series Side Entry Mixers

Industrial Mixing - Fixed Pitch Blade Impeller

Fixed Pitch Blade Impeller

This 45° pitch 4-bladed impeller produces an optimum combination of pumping and shear, which allows intimate mixing in both low and high viscosity applications.

arrow DMX Series Portable Mixers
arrow GMX Series Industrial Agitators
arrow NMX Series Industrial Agitators

Industrial Mixing - Fixed High Solidity Dynaflow™ Airfoil Impeller

Fixed High Solidity Airfoil Impeller

The Dynaflow™ high solidity airfoil impeller is a high-efficiency, low shear, 4-bladed impeller high-solidity used for gas dispersion in high-viscosity liquids. This impaller produces maximum fluid flow using minimum power input.

arrow DMX Series Portable Mixers
arrow GMX Series Industrial Agitators
arrow NMX Series Industrial Agitators
arrow SMX Series Side Entry Mixers

Industrial Mixing - Fixed Blade Anti-Ragging Impeller

Fixed Blade Anti-Ragging Impeller

Environmental mixing applications exist, such as in waste water treatment facilities, where the fluid can have a high fibrous rag-like content. Mixing impellers that resist the accumulation of rags are known as “anti-ragging”.

arrow DMX Series Portable Mixers
arrow GMX Series Industrial Agitators
arrow NMX Series Industrial Agitators

Industrial Mixing - Fixed Radial Blade

Fixed Radial Blade Impeller

The fixed blade radial impeller is primarily used for applications requiring mixing at low liquid levels since it can produce good mixing when positioned on the bottom of the tank. It is also used for applications requiring high shear.

arrow ITM Series Tote Mixers
arrow DMX Series Portable Mixers
arrow GMX Series Industrial Agitators
arrow NMX Series Industrial Agitators

Industrial Mixing - Marine Type Propeller

Marine Type Propeller

The marine type propeller is often used in small, portable, direct drive mixer applications because they are economical and efficient. Because their design is rooted in boat propulsion, they are most effective as an axial flow pumper at high speeds.

arrow MMX Series Drum Mixers
arrow DMX Series Portable Mixers


Collapsible Blade Impellers

Industrial Mixing - Collapsible Dynaflow Impellers

Collapsible Dynaflow™ Airfoil Impeller

This high-efficiency, low shear, 4-bladed collapsible impeller was designed specifically for operation in tote containers that require large diameter impellers to pass through a small opening.

Collapsible Dynaflow™ impellers are available with diameters up to 21″

arrow ITM Series Tote Mixers

Industrial Mixing - Collapsible Pitch Impellers

This collapsible, 4-bladed, 45° pitched blade impeller provides intimate mixing in higher viscosity fluid. Designed specifically for operation in drum and tote containers that require large diameter impellers to pass through a small opening.

Collapsible pitch impellers are available with diameters up to 21″

arrow MMX Series Drum Mixers
arrow ITM Series Tote Mixers

REQUEST A QUOTE →

Submit a quote request online, or call us directly at 1-877-331-0045 to find out how we can optimize the quality of your application results.

Solution Assurance Guarantee
PERFORMANCE. GUARANTEED.
By achieving true axial flow mixing in your application, we can guarantee the time to uniformity. We call this our process guarantee - Our Solution Assurance.

Mixing Experience with Solutions