NMX Series Industrial Agitators

OUR HEAVY-DUTY INDUSTRIAL AGITATORS

NMX Series Heavy-Duty Industrial Agitators

NMX Series

Product Description

Dynamix’s heavy-duty Industrial Agitators and Mixers utilize the most robust gearbox, bearings, and shaft configurations.

Our Industrial Agitators also address ancillary needs such as efficiency, required reactions, environmental, and unique application factors. This is how Industrial Agitators are engineered into true heavy-duty mixing solutions – the NMX Series.

The NMX Series industrial agitator is specifically designed for heavy industrial mixing. Quality components and rugged construction produce long-term, trouble free operation. The NMX Series agitators are both heavy-duty and high-efficiency.

This industrial mixer series is the powerhouse of our line of Industrial Agitators, and is typically applied in heavy industry such as Energy and Natural Resources, and large-scale chemical processes.

Key Features

arrowFor use in applications ranging from 2,500 to 100,000 gallon tanks

arrowEach agitator is custom designed for the application

arrowHeavy-duty gearbox design to withstand the heaviest loads

arrowAccommodates any tank with multiple mounting options

arrowStandard High-efficiency Dynaflow™ impeller, with multiple impeller options available

NMX Series Agitators

CONFIGURATION OPTIONS

arrowMOTORS HP RANGE
Standard NEMA C-face motors with a power range from 1 to 75 HP. Other motor configurations are available.

arrowGEARS
Gears are constructed of SAE 8620 steel, with a minimum 58 Rockwell hardness. Ground to AGMA 13 quality rating, the gears will provide long and quiet operation.

arrowGEAR REDUCTION
The NMX Series features gear reduction ratios from 5:1 to 130:1, providing a wide-range of mixing speeds for all applications.

arrowHOUSING
A strong and rigid one piece housing design is crafted from SAE 30 gray iron, and features exceptional housing torsional stiffness and a thick housing wall section.

arrowHEAVY-DUTY
Oversized, tapered heavy-duty output roller bearings are rated for an L-10 life over 100,000 hours, and can withstand the heaviest loads.

arrowOIL SEALS
Quardrillip output oil seal design protects assembly even in the harshest environments. Drywell seal option is also available.

arrowSHAFT MOUNTING
Shaft mounting options available include hollow quill or solid shaft with flange coupling for ease of assembly in the field.Optional flange is available to allow quick disassembly of gearbox from mixer shaft for service.

arrowSERVICE FACTOR
Based on motor horsepower, a minimum gearbox service factor of 1.5 ensures continuous long-term operation under heavy loads.

arrowMOUNTING
The NMX Series features flexible mounting options fabricated from thick steel. Plate, Flange or Pedestal mounts ensure compatibility with a wide range of tanks and supports. 
Various sizes are available.

NMX Series Industrial Agitators

arrowSHAFT
All Dynamix shaft sizing minimum parameters meet or exceed industry standards, and all shafts are designed to withstand torsional and bending loads. Our shafts are designed to run well below critical speeds and have a conservative slenderness ratio to eliminate excessive vibration. Solid shafts are standard, while a hollow shaft option is available for longer shafts.

arrowIMPELLERS
HIgh-Efficiency Blade Dynaflow™ – Dynamix’s Dynaflow™ impellers are extremely efficient producing a high-level of pumping per input horsepower. The best impeller for low viscosity blending and solid suspension applications up to 2500 cps.

Pitch Blade – Suited for applications when a greater fluid shear level is required than a Dynaflow™ impeller can offer or for higher-viscosity applications.

Radial Blade – A radial impeller is best suited for low-level liquid blending or high-shear mixing applications.

Other customized impeller options are also available, including:

  • High-Solidity Dynaflow™ – for gas dispersion and solid suspension applications
  • Rushton Turbine – for gas dispersion
  • Ragless impeller – for wastewater applications to prevent ragging

Feel free to call us to discuss your specific impeller needs.

arrowIMPELLER HUBS
There are several options available for impeller hubs:

  • Completely Welded – both hub and impellers are welded to shaft
  • Welded Hub – hub is welded to shaft, impellers are bolted to tab
  • Keyed Hub – hub is keyed to shaft, impellers are bolted to tab
  • Split Hub – for hollow shaft applications

arrowCONSTRUCTION MATERIALS
Carbon steel and stainless steel are standard construction materials. Other materials and coating options are also available to address issues such as abrasion / corrosion resistance.

Note: We do not have one single model for industrial agitators. Dynamix engineers this product line according to your application and process. Our Chemical and Mechanical Engineers come from various process industries and will work to understand and develop your design requirements.

If you are unsure of your industrial tank design…

REQUEST A QUOTE →

Submit a quote request online, or call us directly at 1-877-331-0045 to find out how we can optimize the quality of your application results.

Solution Assurance Guarantee
PERFORMANCE. GUARANTEED.
By achieving true axial flow mixing in your application, we can guarantee the time to uniformity. We call this our process guarantee - Our Solution Assurance.

LEARN MORE →

Mixing Experience with Solutions